Product Categories

Newsletter Sign Up

   
BTX Products

RDL Dual Microphone Compressor

RDL Dual Microphone Compressor produces steady levels from any microphone.

BTX part #: RDL-HRMCP2
Radio Design Labs #: HR-MCP2

Pricing

Your Price

Stock:

Non Stock

QTY.

 EA
BTX Guarantee: Any in-stock product ordered by 5pm ET will ship the SAME DAY.
  • Description
  • Specs
  • Docs/Video
  • Provides Two Independent Microphone Input Compression Channels, Line-Level Outputs Permit Operation as Dual Mic Preamp, Balanced Mic Inputs on XLR and Detachable Terminal Block, Balanced Outputs on XLR and Detachable Terminal Block, Independent Controls for Stereo or Dual Mono Operation, Front-Panel Gain Adjustment from 20 to 60 dB for Line Outputs, Switch-Selectable 15 dB Input Pads, Switch-selectable 48 Volt Phantom for Both Inputs and 7 LED Gain Reduction Meter in 3 dB Increments per Channel.

  • Specifications:

    • Inputs (4): XLR (2, 3 pin, rear panel,1=GND, 2+, 3-); detachable terminal block (2)
    • Input level (for uncompressed output): -60 dBu to -20 dBu (without input pad); -45 dBu to -5 dBu (with input pad)
    • Maximum Input Level: > +5 dBu (input pad disabled), +22 dBu (input pad enabled)
    • Input Impedance: > 1.5 kΩ balanced
    • Phantom power: Selectable 48 V phantom (IEC 61938: 2013)
    • Input pad (2): 15 dB nominal (1 per input channel)
    • Outputs (4): XLR (2, 3 pin, rear panel,1=GND, 2+, 3-); detachable terminal block (2)
    • Output Impedance: 150 Ω balanced
    • Channels: 2 (1 and 2; may be used for stereo or as two separate mono channels)
      Gain Trim (2): 20 dB to 60 dB (line-level output; front panel adjustable; one for each channel)
    • Frequency Response: 10 Hz to 25 kHz (± 0.5 dB, FLAT); -3 dB @ 80 Hz (LOW-CUT FILTER enabled)
    • THD: Below noise floor (3 dB compression)
    • Crosstalk: Below noise floor
    • Indicators (17): POWER LED (blue), GAIN REDUCTION (7 per channel, yellow, 3, 6, 9, 12, 15, 18, 21 dB), CLIP (2, red)
    • Power Requirement: 24 Vdc @ 200 mA (230 mA with phantom), Ground-referenced
    • Mounting: Rack-mount using optional rack adapters such as HR-RA2; or operate free-standing (feet included)
    • Dimensions: Height: 1.7 in, 4.3 cm; Length: 8.6 in, 20.6 cm; Depth: 4.59 in, 11.66 cm